Home » Smart TV » How to Fix Roku Tv Stuck on Language Screen?

How to Fix Roku Tv Stuck on Language Screen?

Is your tcl roku tv or any other Roku tv stuck on the choose language screen? Then don’t worry I faced the same issue and I was able to resolve this problem in no time. 

I faced the issue while setting up my TCL Roku tv, it was also stuck on the language screen. To troubleshoot this issue I went online and tried some steps that worked for my tv. In this post, I’ve shared some methods that will fix Roku tv stuck on language screen issues. 

How to Fix Roku TV Stuck on Language Screen?

Check Your Remote

If the remote battery is dead or if the remote is not working, then you can get stuck on the language screen. To troubleshoot this issue change the batteries of your Roku remote. After changing the remote batteries check if you can select the language or not. 

Check remote- You might not be able to select the language during the setup if your remote is not working. So try using a new remote for selecting the language. If the new remote is working then you’ll be able to get past the select language screen on Roku.

check roku remote

Power Cycle Your Roku TV

Sometimes your Roku tv can stuck on the language screen during setup because of a temporary bug. But don’t worry you can easily fix this problem by performing a power cycle on your Roku tv by following the steps below.

  1. Turn off your roku tv.
  2. Now unplug your roku tv power cable.
  3. Press and hold the power button on the tv for 15-20 seconds.
  4. Wait for 10-15 mins.
  5. Now plug in your roku tv and turn it on.
Power cycle your device

After booting the roku tv, complete the setup and enjoy watching your roku tv. If the roku tv is still stuck on the choose language screen then you can try following the other methods mentioned below.

Reset Your Roku TV Remote

Resetting your roku tv remote can also fix the roku tv stuck language screen issue. To get past the language screen you can reset your Roku remote by following the steps below.

  1. Remove the back panel of the remote.
  2. Now locate the reset button on the remote.
  3. Now press and hold the reset button for 10 seconds.
reset your roku remote

After resetting your roku tv remote check if it is working or not.

Factory Reset Your Roku TV

If your roku tv is stuck on “let’s get started” select the language screen and if the remote is not working, then you can factory reset your roku tv by following the steps below.

  1. Locate the reset hole at the back of your tv.
  2. Now use a paperclip or a pointy pin to insert and hold the reset button for 20 seconds.
reset tcl roku

Now your roku tv will reset and restart in a couple of seconds. Now follow the on-screen instructions to complete the roku tv setup.

Contact Roku TV

If your roku tv is still stuck on the select language screen, then you can contact the roku team for help. The experts at roku can help in fixing this problem. 

More Helpful Guide:

Roku keeps crashing

Roku no home screen issue

Tcl roku tv stuck on red screen

Roku picture zoomed in

Roku keeps disconnecting from wifi

Fix roku low power issue

Leave a Comment